ซาโดลิน ยอร์ช

Sadolin Yacht is a high quality, clear, solvent borne, full bodied urethane lacquer with a UV-filler for all exterior woodwork above the waterline. Resulting in a beautiful finish, Sadolin Yacht provides a surface that is very resistant to wear, sun rays, salt water and salty air, thereby ensuring excellent durability and long term maintenance. 

 

PREPARATION

Please ensure that the woodwork is clean, completely dry and free from wax, natural oils, resin and latex compounds. Previous coats which have been in contact with salt water should be cleaned and rinsed with fresh water or sanded back to bare wood before the application of Sadolin Yacht to achieve the best adhesion. Resinous timber should be cleaned with cellulose thinners just before application 

 

APPLICATION 

New timber or surface sanded back to bare timber should be primed with either Sadolin Base for further protection or primed with a coat of  Sadolin Yacht thinned with white  sprint in the  ratio of 1 part white sprit to 4 parts of Sadolin Yacht. Stir well before and during application and apply using a brush. Lightly sanding between coats is recommended. Ensure that all sanding residues are removed. 

 

Do not apply at temperatures below 5 °C.

 

Apply 2-3 thin coats depending on the required durability.

Brushes should be cleaned immediately after use with white spirit and afterwards with soapy water.

 

 

Sadolin Yacht 是一种高品质、透明、溶剂型、高浓度的聚氨酯漆，带有紫外线填充剂，适用于流水线以上的所有室外木制品。 Sadolin Yacht对于磨损、阳光、盐水和含盐空气有着出色的抵抗性，具备耐用性，以达至美观的效果。

 

制备方法

“请确保木制品清洁、完全干燥且不含蜡、天然油、树脂和乳胶化合物。 在使用本产品前，应清洁并用淡水冲洗或打磨裸木，以达到最佳附着力。 树脂木材应在施工前，使用纤维素稀释剂清洁。

“

 

使用方法

新木材或用砂纸打磨成裸木的表面应涂上 Sadolin Base以进一步保护，或涂抹一层以油漆溶剂油稀释过的 Sadolin Yacht ，比例为 1 份油漆溶剂油与 4 份 Sadolin Yacht。施工前和施工过程中充分搅拌并使用刷子涂抹。 建议在涂层之间轻轻打磨。 确保清除所有打磨残留物。

 

请勿在低于 5 °C 的温度下施工。

 

根据自己所需的耐久性，涂上 2-3 层薄涂层。

刷子在使用后应立即用油漆溶解剂清洗，然后再用肥皂水清洗