ไฟว์ฟ อิน วัน พรีเมี่ยม เรด อ๊อกไชด์ ไพรเมอร์

Nippon 5in1 Premium Red Oxide Primer

FOR IRON & METAL

Type: Anti-corrosive primer based on Long Oil Alkyd Resin with Red Oxide Pigment 

Uses: General purpose anti-corrosive primer for both Interior and Exterior application on iron and steel structures.

 

Special Features

-Corrosion Protection

-Durable Pro

-Easy Application

-Super Coverage

-Good Adhesion

 

Appearance and Colour: Flat, Reddish Brown

Drying Time (30 C)

-Surface Dry 20 – 30 minutes

-Hard Dry 4 hours

-Dry to recoat more than 16 hours

 

Film Thickness: 35-40 microns/coat

Coverage: 30-35 m2  /Gallon/coat

Thinner: Nippon Paint’s Thinner

Standard Packing: 1 Gallon.

 

Surface Preparation 

– The surface must be clean and dry, free from millscale. rust, grease, oil and other foreign matters. 

– Immediately after the removal of all rust and miliscale of steel work, the surface should be primed with the Anti-corrosive primer as specified. 

– Previously painted of metal-work should be thoroughly washed down. all defective paintwork removed by scraping back to a film edge and all rust removed by wire brushing and scraping back to clean metal. All areas exposed should be toughtened up immediately with the specified anti- corrosive primer. 

 

Paint Preparation: After stiring the paint thorough. 

Dilute with Nippon Paint’s Thinner up to 5 % when apply

brush and 10 – 15 9 when apply by airless Spray. 

 

Application Method: Brush. Roller or Spray.

Note: Figures piven are average for reference. Actualligures may vary, depending.